FIREFIGHTER ROBOT BY ANDROID TECHNOLOGY.
Fire fighting is an important job, but a firefighter robot by android technology can be a very dangerous occupation. Due to that, Robots are designed to find a fire, before it rages out of control. It could be used to work with firefighters to reduce the risk of injury to victims. … The LCD also gives the graphical information of the robot status to the user.
WORKING OF FIGHERFIGHTING ROBOT BY ANDROID TECHNOLOGY
There are several possibilities of fire in any remote area or industry. For instance, in garments godowns, cotton mills, and fuel storage tanks, electric leakages may result in immense fire & harm. In the worst of cases & scenarios, fire causes heavy losses both financially and by taking lives. Robotics is the best possible way to guard human lives, wealth and surroundings. A Firefighting robot is designed and built with an embedded system. It is capable of navigating alone on a modeled floor while actively scanning the flames of fire.
FIRE DEVICE ROBOT CONTROL
The robot could be used as a path guide in a fireplace device or, in a normal case, as an emergency device. This robot is designed in such a way that it searches a fire, & douses it before the fire could spread out of range & control. This type of firefighting robot will sooner or later work with firefighters, thus greatly reducing the danger of injury to victims. Apart from this, this Firefighting robotic project will also help generate interest along with the innovations in the field of robotics while operating towards a sensible and obtainable solution to save lives and mitigate the danger to property.
FIREFIGHTING ROBOT REMOTELY OPERATED BY ANDROID APPLICATION
The main intention of this project is to design a fire fighting robot using an Android application for remote operation. The firefighting robot has a water tanker to pump water and spray it on fire; it is controlled through wireless communication. For the desired operation, 8051 microcontrollers are used.
In the proposed system, an android application is used to send commands from the transmitter end to the receiver end for controlling the movement of the robot in forwarding, backward, right or left directions. At the receiver side, two motors are interfaced with the 8051 microcontrollers wherein two of them are used for the movement of the vehicle and the remaining one to place the arm of the robot.
HOW DO YOU MAKE A FIREFIGHTING ROBOT BY ANDROID
components-
- Arduino UNO.
- Fire sensor or Flame sensor (3 Nos).
- Servo Motor (SG90).
- L293D Motor Driver module.
- Small Breadboard.
- Robot chassis with motors and wheel (any type).
- A small can.
- Connecting wires.
EMT;-
An EMT, also known as an EMT-Basic, cares for patients at the scene of an incident and while taking patients by ambulance to a hospital. An EMT has the skills to assess a patient’s condReduce human effortition and to manage respiratory, cardiac, and trauma emergencies. Paramedics provide more extensive pre-hospital care than do EMTs.
ADVANTAGES OF FIREFIGHTER ROBOT USING ANDROID
- The fire detecting robot helps in the following ways.
- To detect the exact direction of the fire source.
- The capability of sensing accurately with increased flexibility.
- Reduce human effort
- Reliable and economical.
- Not sensitive to weather conditions.
DISADVANTAGES OF FIREFIGHTER ROBOT USING ANDROID
- No monitoring system for the vehicle.
- No remote control for the robotic movement.
- Our system used only for less than 3.5Kg application.
- It is not used to put out large fires.
CONCLUSION;-
Here we successfully developed the FIRE EXTINGUISHER Robot.
The robot detects temperature, smoke, and flame at the site where the robot exists.
The movement of this robot vehicle is controlled by MCU as per the program.
This robot is helping full in those areas where natural calamity and bomb explosions where occurred.
If the fire is detected with the help of sensors, MCU operates the water pump mechanism through the relay circuit.
IN CASE KIND OF FIGHTER ROBOT PROJECTS
All of the above; If this article is not working for you. So you can contact with the subject of your specific project. And we will lead you, to get that kind of project as soon as possible. If in case you are feeling to buy a project for FIREFIGHTER ROBOT BY ANDROID TECHNOLOGY; simply contact us. And for your convenience; that we provide all BTech mechanical engineering projects. You can also check our robot projects like hydraulic flore crane.
More updates of latest Computer Science Projects:




















COMPUTER SCIENCE ENGINEERING PROJECTS

ANDROID PROJECTS FOR COMPUTER SCIENCE -FINAL YEAR PROJECTS IN LUCKNOW




More updates of all Engineering Projects:

Latest Projects topics on Detection and monitoring system for Final Year Engineering Students

Latest Projects Ideas on the sensor for Final Year Engineering Students

Latest Projects Ideas on a security system for Final Year Engineering Students

GSM and GPS based Projects Ideas for Final Year Engineering Students

Biometric and fingerprint based Projects Ideas for Final Year Engineering Students

Touch screen based Projects Ideas for Final Year Engineering Students

Microcontroller

SMS and phone controlled Projects Ideas for Final Year Engineering Students

RF and DTMF based Projects Ideas for Final Year Engineering Students

Wireless Communication Projects Ideas for Final Year Engineering Students

Xbee and Zigbee Based Projects for Final Year Engineering Students

Mechanical Engineering Projects Final Year 2020 Lucknow







































Share with Your Friends & Family:
- Click to share on Facebook (Opens in new window)
- Click to share on Twitter (Opens in new window)
- Click to share on WhatsApp (Opens in new window)
- Click to share on Pinterest (Opens in new window)
- More
- Click to share on LinkedIn (Opens in new window)
- Click to share on Tumblr (Opens in new window)
- Click to share on Telegram (Opens in new window)
- Click to share on Skype (Opens in new window)
- Click to share on Reddit (Opens in new window)
- Click to share on Pocket (Opens in new window)
- Click to print (Opens in new window)