360 DEGREE WHEEL ROTATING VEHICLE.
As referenced over, this venture is about a plan of 360-degree wheel rotating vehicle. This vehicle moves every which way and this plan gives better solace and furthermore spares the season of clients, the vast majority of the general population utilizing this vehicle to convey products, understanding and so on. In any case, more often than not, they need to confront the issue like taking U-turn and so forth. So we need to structure a 360-degree wheel turning vehicle to lessen and dispose of issues in the business and at the railroad stage. This structure will give better solace and furthermore spares the season of clients, that is the reason it is additionally the dependable for the client. As it is likewise battery-operated vehicle consequently no fuel is required. Consequently, it is affordable to the earth. This will likewise diminish the expense of the vehicle. Zero degrees turning span of a vehicle suggests the vehicle pivoting around a hub going through the focal point of gravity of the vehicle, for example, the vehicle turning at a similar spot, where it is standing. No additional room is required to turn the vehicle.
WORKING OF 360 DEGREE WHEEL ROTATING VEHICLE
The base frame is manufactured as per the dimensions. At the corners of the frame, the clamps are fixed with shafts mounted on them. Above the shaft, the sprocket wheel setup is mounted. A four-wheel sprocket is used in the setup. The wheel sprockets are connected using a cycle chain. Using the clamp the dc motor is mounted in the frame. The wheels are connected to the motor via the shaft. A 12v 7amp/hr battery is placed in the back of the frame. Using wire connections the motor is connected to the battery. ESP wifi board is mounted on the setup using a breadboard or cardboard. The relay boards are fixed in the same place. ESP wifi board is programmed by interfacing with the relay board. The interfaced electronic setup is then connected to the motor for controlling the motor setup. All the connections are made to connect to the battery.
COMPONENTS USE IN 360 DEGREE WHEEL ROTATING VEHICLE
- DC MOTOR
- CYCLE CHAIN
- ESP WIFI BOARD
- CONNECTING WIRES
- STEEL FRAME
- RELAY BOARD
The performance analysis of the 360-degree wheel rotation vehicle has clearly shown that it is more efficient, economical and effective. In this project forward and backward movement of the vehicle and turning off the rear wheel of the vehicle is getting power from the battery in the form of electrical energy. This energy is stored into a 12V battery and then supplied to the components. As the electrical power is used and transmitted to components by the use of electrical wires in place of any mechanical arrangement, this results in less noise, less wear of components and less vibration. The use of a battery provides a smooth flow of current toward the components.
- It consumes very little time to turn from one direction to another direction.
- It is more efficient compared to other types of load-carrying vehicles.
- This type of load carry vehicle is easily parked in any direction.
- It is a less costly load carry vehicle.
- Less noise operation.
- Battery operated thus no fuel required.
- More efficient.
- The battery is using in this 360-degree wheel rotation vehicle to move forward and backward, so it is a kind pollution-free vehicle.
- Frequent charging of the battery.
- Heavy loads could not be driven.
- Reduced working time due to power problems.
- Complicated chain arrangement.
- Battery power is required to move off the vehicle.
- In Industries for automation of raw material like automated guided vehicles.
- In the automobile sector, there are so many types of vehicles that are used to carry goods from one position to another position. There is space problem in the industry so this vehicle is used in automotive applications because this vehicle consumes very little space compared to other types of vehicles.
- This vehicle is used in small Industries for transportation of raw material from one position to another position.
A prototype for the proposed approach was developed by introducing steering and DC motor to wheel rotates 360 degrees. This prototype was found to be able to be maneuvered very easily in tight spaces, and after manufacture of 360-degree wheel rotation vehicle consumed very less space to turn from one direction to another direction and it consumes less time to turn and this vehicle used in various areas such as small industries or railway platforms.
IN CASE KIND OF PROJECTS
All of the above; If this article is not working for you. So you can contact the subject of your specific project. And we will lead you, to get that kind of project as soon as possible. If in case you are feeling like buying a project for 360 DEGREE WHEEL ROTATING VEHICLE;.simply contact us. And for your convenience; that we provide all BTech mechanical final year engineering projects.